Web Interface Tutorials – Multy M6E (WSQ65)
Overview
This chapter shows you how to configure the Multy Device’s various features through the Web Configurator.
See
Differences Between Multy Devices for more information on the Multy Device models that allow you to configure settings through the Web Configurator.
Accessing the Web Configurator
1 Make sure your Multy Device hardware is properly connected (refer to the Quick Start Guide).
2 Launch your web browser.
3 If the Multy Device is in NAT (Standard) Mode (the default mode), enter "192.168.212.1" in the browser’s address bar.
If the Multy Device is in AP Mode, enter “http:// (DHCP-assigned IP)” in the browser’s address bar.