4G LTE Indoor Router
LTE3202-M437
IP networking
- Supports IPv4 and IPv6 dual stack
- Supports DHCP server
- Supports VPN pass through
- Firewall
- NAT/NAPT
- Supports port-forwarding/DMZ
- DNS/DDNS
- Supports NAT router mode
- Supports bridge mode/IP pass-through
Wireless LAN
- Auto channel selection
- WiFi Protected Setup (WPS)
- WiFi-enabled devices: up to 32
- Security: none, WPA2
- MAC address filtering with 32 address supported
- Multiple SSIDs/hidden SSIDs
- WPS: PIN and PBC, WPS 2.0
Management
- APN management
- SIM PIN management
- SMS management
- Secure remote management via web GUI/SSH
- Over-The-Air (OTA) firmware upgrade: TR-069/web GUI/FOTA
- APP management (iOS/Android)
LTE Air interface
- Standard-compliant: 3GPP Release 9 Category 4
- Supported frequencies: LTE B1/3/7/8/20/28A/38/40/41
- Peak data rates*:
- 150 Mbps DL within 20 MHz bandwidth
- 50 Mbps UL within 20 MHz bandwidth
UMTS/GSM Air interface
- Standard-compliant: DC-HSDPA/ HSPA+
- Supported frequencies:
- HSPA+/UMTS, B1/8
- EDGE/GPRS/GSM, B3/8
- Peak data rates:
- DC-HSPA+ DL data rates up to 42 Mbps
- HSUPA UL data rates up to 5.76 Mbps
- UMTS data rates up to 384 Kbps
- EDGE data rates up to 236.8 Kbps
- GPRS data rates up to 85.6 Kbps
WLAN Air interface
- Standard-compliant: IEEE 802.11 b/g/n
- Supported frequencies: 2.4 GHz, link rates up to 300 Mbps
Hardware interface
- Four 10/100 Mbps Ethernet RJ-45 LAN ports
- LEDs:
- 2G/3G/4G network status
- Signal strength
- LAN status
- WiFi/WPS status
- SMS notification
- 3FF/Micro SIM card slot (push-pull)
- Power button
- WPS & WiFi on/off button
- Reset button
- DC power jack (12 V/1 A)
- Two LTE/3G/2G external SMA-F connectors
- Two LTE/3G/2G internal antennas
- Two WiFi internal antennas
- 5.8 W (at room temperature)
- Item dimensions (WxDxH) including stand: 163.5 x 72.2 x 146.6 mm (6.43” x 2.84” x 5.77”)
- Item weight: 270 g (0.595 lb.)
- Packing dimensions (WxDxH): 184 x 88 x 156 mm
- Packing weight: 567 g (1.25 lb.)
Operating environment
- Temperature: 0°C to 40°C (32°F to 104°F)
- Humidity: 10% to 90% RH (non-condensing)
Storage environment
- Temperature: -30°C to 70°C (-22°F to 158°F)
- Humidity: 5% to 95% (non-condensing)
- The maximum data rates is a theoretical value. The actual data rates depend on the network environment.
- All specifications are subject to change without notice.