802.11ac Dual-Radio Ceiling Mount PoE Access Point

Models	NWA1123-ACv2 802.11ac Dual-Radio Ceiling Mount PoE Access Point
Main Design
Wireless frequency	2.4 GHz & 5 GHz
Radio	2
RF Specifications
Frequency band	2.4 GHz 2.4 GHz (IEEE802.11 b/g/n) USA (FCC): 2.412 to 2.462 GHz Europe (ETSI): 2.412 to 2.472 GHz 5 GHz 5 GHz (IEEE 802.11 a/n/ac) USA (FCC): 5.15 to 5.35 GHz; 5.725 to 5.850 GHz Europe (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz
802.11 premium features	2x2 multiple-input multiple-output (MIMO) with two spatial streams Maximal ratio combining (MRC) 20-, 40- and 80-MHz channels PHY data rates total up to 300 Mbps (11n) + 866 Mbps (11ac) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) Cyclic Delay diversity (CSD) support Maximum Likelihood Demodulation (MLD) support Low Density Parity Check (LDPC) support
Typical transmit output power (dBm) *1	US (FCC) 2.4 GHz : 23 US (FCC) 5 GHz : 26 EU (ETSI) 2.4 GHz : 20 EU (ETSI) 5 GHz : 26
Number of antenna	2T2R MIMO
Antenna gain	2.4 GHz : 3 dBi 5 GHz : 4 dBi
Support data rate	802.11a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps 802.11n: up to 300 Mbps in MCS15 (40MHz; GI=400ns) 802.11ac:up to 866 Mbps in MCS9 (80MHz; 2 spatial Streams; GI=400ns)
Receive sensitivity	2.4 GHz : 802.11b/g, min. up to -99 dBm 802.11n/20 MHz, min. -93 dBm 802.11n/40 MHz, min. up to -88 dBm 5 GHz : 802.11a, min. up to -95 dBm 802.11ac/n/20 MHz, min. -94 dBm 802.11ac/n/40 MHz, min. -92 dBm) 802.11ac/80 MHz, min. -89 dBm)
LAN
Number of 10/100/1000M LAN	1
PoE	Yes
PoE power draw	9 W
WLAN Security
WEP	Yes
WPA/WPA2-PSK	Yes
WPA/WPA2-Enterprise	Yes
EAP type	EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST, EAP-AKA and EAP-SIM
WMM	WiFi compliant
IEEE 802.1X	Yes
Number of multiple SSID	16
MAC filtering	Yes
L2 Isolation	Yes, multiple profile
RADIUS authentication	Yes
Network
IPv6 support	Yes
VLANs	Yes
DHCP client	Yes
Zyxel One Network
ZON Utility	Discovery of Zyxel switches, APs and gateways Centralized and batch configurations IP configuration IP renew Device reboot Device locating Web GUI access Firmware upgrade Password configuration One-click quick association with Zyxel AP Configurator (ZAC)
Management
Zyxel AP Configurator*2	Batch AP configuration Batch AP firmware upgrade Batch AP profile backup
Standalone AP mode	Yes
CLI	Yes, SSH
SNMP	Yes
Others
Plenum rating	Yes
Power supply	Input: AC 100 - 240 V - 50/60 Hz 0.3 A; Output: DC +12 V 1 A
MTBF (hr)	1,241,824
Standard Compliance
Ethernet	IEEE 802.3 IEEE 802.3u IEEE 802.11ac IEEE 802.3az IEEE 802.3af
WLAN	802.11b: DBPSK, DQPSK, CCK 802.11g: BPSK, QPSK, 16-QAM, 64-QAM 802.11a: BPSK, QPSK, 16-QAM, 64-QAM 802.11n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM
Certifications
Radio	FCC Part 15C FCC Part 15E ETSI EN 300 328 EN 301 893 LP0002 EN 60601-1-2
EMC	FCC Part 15B EN 301 489-1 EN 301 489-17 EN55032 EN55024 EN61000-3-2/-3 BSMI CNS13438
Safety	EN 60950-1 IEC 60950-1 BSMI CNS14336-1
Physical Specifications and others
Item	Dimensions (WxDxH)(mm/in.) 130 x 130 x 54.7/5.12 x 5.12 x 2.17 Weight (g/lb.) 300/0.67
Packing	Dimensions (WxDxH)(mm/in.) 278 x 209 x 72/10.94 x 8.23 x 2.83 Weight (g/lb.) 700/1.54
Included accessories	Power adapter Wall/Ceiling-mount plate
Environmental Specifications
Operating	Temperature 0°C to 50°C/32°F to 122°F Humidity 10% to 90% (non-condensing)
Storage	Temperature -30°C to 70°C/-22°F to 158°F Humidity 10% to 90%

Notes:
*1: Maximum output power is limited by regional regulatory.
*2: Support from ZAC Utility V1.1.3 or above; support only in standalone mode.