Your browser either does not support JavaScript or you have turned JavaScript off.

802.11ac Dual Radio Unified Pro Access Point

Specifications

Models WAC6503D-S WAC6502D-S
Models
WAC6503D-S
WAC6503D-S
WAC6502D-S
WAC6502D-S
Description
Product name 802.11ac Dual Radio Smart Antenna 3x3 Access Point 802.11ac Dual Radio Smart Antenna 2x2 Access Point
Main Design
Wireless frequency 2.4 and 5 GHz 2.4 and 5 GHz
Radio 2 2
RF Specifications
Frequency band 2.4 GHz (IEEE 802.11 b/g/n)
  • USA (FCC): 2.412 to 2.462 GHz
  • Europe (ETSI): 2.412 to 2.472 GHz
  • Taiwan (TW): 2.412 to 2.462 GHz
2.4 GHz (IEEE 802.11 b/g/n)
  • USA (FCC): 2.412 to 2.462 GHz
  • Europe (ETSI): 2.412 to 2.472 GHz
  • Taiwan (TW): 2.412 to 2.462 GHz
802.11n/ac premium features
  • 3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams
  • Maximal Ratio Combining(MRC)
  • 20-, 40- and 80-MHz channels
  • Packet aggregation:A-MPDU (Tx/Rx), A-MSDU(Tx/Rx)
  • Cyclic Delay Diversity (CSD)support
  • Maximum Likelihood Demodulation (MLD) support
  • Low Density Parity Check(LDPC) support
  • 3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams
  • Maximal Ratio Combining(MRC)
  • 20-, 40- and 80-MHz channels
  • Packet aggregation:A-MPDU (Tx/Rx), A-MSDU(Tx/Rx)
  • Cyclic Delay Diversity (CSD)support
  • Maximum Likelihood Demodulation (MLD) support
  • Low Density Parity Check(LDPC) support
Conducted typical transmit output power (dBm) FCC 11b/g : 29
FCC 11g/n : 29
FCC 11a : 30
FCC 11n/a (ac) : 30
EU 11b/g : 15
EU 11g/n : 15
EU 11a : 23
EU 11n/a (ac) : 23
FCC 11b/g : 28
FCC 11g/n : 28
FCC 11a : 28
FCC 11n/a (ac) : 28
EU 11b/g : 14
EU 11g/n : 14
EU 11a : 22
EU 11n/a (ac) : 22
Number of antenna*1 6 embedded smart antenna 4 embedded smart antenna
Antenna gain 4 dBi @2.4 GHz
6 dBi @5 GHz
4 dBi @2.4 GHz
6 dBi @5 GHz
Support data rate
  • 802.11a/g: 6, 9, 12, 18, 24, 36,48, and 54 Mbps
  • 802.11b: 1, 2, 5.5 and 11 Mbps
  • 802.11n: up to 450 Mbps in MCS23 (40 MHz)
  • 802.11ac: up to 1300 Mbps in MCS9 (80 MHz)
  • 802.11a/g: 6, 9, 12, 18, 24, 36,48, and 54 Mbps
  • 802.11b: 1, 2, 5.5 and 11 Mbps
  • 802.11n: up to 300 Mbps in MCS23 (40 MHz)
  • 802.11ac: up to 866 Mbps in MCS9 (80 MHz)
Receive sensitivity Min. Rx sensitivity up to -102 dBm Min. Rx sensitivity up to -100 dBm
Interfaces
Number of 10/100/1000M LAN 2 2
Console port RJ-45 serial RJ-45 serial
PoE Yes Yes
PoE power draw 17.04W 15.12W
WLAN Features
WLAN maximum throughput Up to 900 Mbps Up to 600 Mbps
Mesh AP (By license)*2 Yes*2 Yes*2
Mesh AP for multiple SSID with VLAN*2 Yes*2 Yes*2
Fast roaming*2 Pre-authentication
PMK caching and 802.11r/k/v
Pre-authentication
PMK caching and 802.11r/k/v
Wireless Security
WEP Yes Yes
WPA/WPA2-PSK Yes Yes
WPA/WPA2-Enterprise Yes Yes
EAP types EAP-TLS, EAP-TTLS, EAPPEAP,EAP-FAST, EAP-AKA and EAP-SIM EAP-TLS, EAP-TTLS, EAPPEAP,EAP-FAST, EAP-AKA and EAP-SIM
IEEE 802.1X Yes Yes
Number of SSID 16 16
Web authentication*2 Yes Yes
MAC filtering Yes Yes
Layer-2 isolation Yes Yes
RADIUS authentication Yes Yes
Microsoft AD authentication*2 Yes Yes
LDAP authentication*2 Yes Yes
MAC authentication*2 Yes Yes
Rogue AP detection Yes Yes
Rogue AP containment Yes Yes
Network
IPv6 host Yes Yes
VLANs Yes Yes
DHCP client Yes Yes
QoS
WMM Yes Yes
WMM power save Yes Yes
DiffServ marking Yes Yes
Management
ZON Utility
  • Discovery of Zyxel switches, APs and gateways
  • Centralized and batch configurations
    • IP configuration
    • Device reboot
    • Device reboot
    • Firmware upgrade
    • IP renew
    • Device locating
    • Device factory reset
    • Device reboot
    • Web GUI access
    • One-click quick association with Zyxel AP Configurator (ZAC)
Smart Connect
  • Neighbor device discovery
  • One-click remote management access to the neighboring Zyxel devices
Zyxel AP Configurator
  • Batch AP configuration
  • Batch AP firmware upgrade
  • Batch AP profile backup
Zyxel Wireless Optimizer
  • WiFi AP planning
  • WiFi coverage detection
  • Wireless health management
Standalone AP mode Yes Yes
Managed AP mode Yes Yes
CLI Yes Yes
Web UI Yes Yes
SNMP v2c/v3 v2c/v3
Others
Plenum rating Yes Yes
Kensington lock support Yes Yes
Input power DC input: 12VDC 2A; PoE: 802.3at compliant (Power adapter is sold separately)
MTBF (hr) 1,202,489 1,407,374
Standard Compliance
Ethernet
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.11ab
  • IEEE 802.3au
  • IEEE 802.3az
  • IEEE 802.3at
PoE IEEE 802.3at*3 IEEE 802.3at*3
WLAN
  • 802.11b: DBPSK, DQPSK, CCK
  • 802.11a: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM
  • 802.11b: DBPSK, DQPSK, CCK
  • 802.11a: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM
Certifications
Radio FCC Part 15C, FCC Part 15E, ETSI EN 300 328, EN 301 893, LP0002 FCC Part 15C, FCC Part 15E, ETSI EN 300 328, EN 301 893, LP0002
EMC FCC Part 15B, EN 301 489-1, EN 301 489-17, EN55022, EN55024, EN61000-3-2/-3, EN60601-1-2, BSMI CNS13438 FCC Part 15B, EN 301 489-1, EN 301 489-17, EN55022, EN55024, EN61000-3-2/-3, EN60601-1-2, BSMI CNS13438
Safety Safety EN 60950-1, IEC 60950-1, BSMI CNS14336-1 Safety EN 60950-1, IEC 60950-1, BSMI CNS14336-1
Physical Specifications
Item Dimensions (WxDxH)(mm/in.)
236 x 227 x 62/9.28 x 8.95 x 2.43
Weight (g/lb.)
982/2.17
Dimensions (WxDxH)(mm/in.)
236 x 227 x 62/9.28 x 8.95 x 2.43Z
Weight (g/lb.)
961/2.12
Packing Dimensions (WxDxH)(mm/in.)
308 x 323 x 127/12.13 x 12.72 x 5.00
Weight (g/lb.)
1743/3.85
Dimensions (WxDxH)(mm/in.)
308 x 323 x 127/12.13 x 12.72 x 5.00
Weight (g/lb.)
1722/3.81
Included accessories
  • Ceiling mount plate
  • Mounting screws
  • Ceiling mount plate
  • Mounting screws
Environmental Specifications
Operating Temperature
0°C to 50°C/32°F to 122°F
Humidity
10% to 90%(non-condensing)
Temperature
0°C to 50°C/32°F to 122°F
Humidity
10% to 90%(non-condensing)
Storage Temperature
-40°C to 70°C/-40°F to 158°F
Humidity
10% to 90%(non-condensing)
Temperature
-40°C to 70°C/-40°F to 158°F
Humidity
10% to 90%(non-condensing)
  1. The antenna is not embedded and external antennas are separately sold.
  2. Features supported when working with Zyxel NXC controller series (ZyMesh feature on WAC6500 Series is available from FW release 4.21 or above.)
  3. Compatible with 802.3af mode with restricted function: 1x3 MIMO or 1x2 MIMO with 1 spatial stream.

*All specifications are subject to change without notice.