XGS-PON Bridge ONT with 10G LAN
Zyxel’s PM7516/PM7510-R0 Series XGS-PON Bridge ONT with 10G LAN supports a symmetric 10/10G profile. This allows service providers to upgrade existing GPON networks for 10 Gigabit broadband access with minimal CAPEX investment.
- XGS-PON
- 10/10G profile
- VoIP
- OMCI protocol
| Model | PM7516-R0 | PM7510-R0 |
|---|---|---|
| Product name | XGS-PON VoIP Bridge ONT with 10G LAN | XGS-PON Bridge ONT with 10G LAN |
| Data rates | 10G/10G (9.953 G/bits) | 10G/10G (9.953 G/bits) |
| RJ-45 LAN port | 100M/1G/2.5G/5G/10 Gbps | 100M/1G/2.5G/5G/10 Gbps |
| VoIP function | Supported | N/A |
| Item Weight | 345 g (0.76 lb.) | 368 g (0.81 lb.) |
| Packing Weight | 620 g (1.36 lb.) | 664 g (1.46 lb) |
Next-gen PON offers seamless network migration
The PM7516/PM7510-R0 Series give service providers the scalability and flexibility to upgrade the existing network. With a 10G WAN and LAN interface, the PM7516/PM7510-R0 Series enable symmetric, unblocking 10/10G data access to meet subscribers’ quickly evolving bandwidth demands.
Excellent user experience with customized product combinations
Adding Zyxel PM7516/PM7510-R0 Series to a network as a Layer-2 ONT helps service providers meet a range of subscriber demands, leaving room for further customization by adding any Layer-3 device based on deployment needs.
Longer infrastructure lifecycle
The fiber tray design prevents damage to fiber cables, increases infrastructure management efficiency, and reduces the cost of on-site support by shielding, protecting, and distributing fiber cables.
Solution we also recommend
System specifications
XGS-PON compliance
- Complies with ITU-T G.9807.1 XGS-PON standard
- Complies with ITU-T G.988 OMCI standard
- DS/US speeds: 9.95328/9.95328 Gbps
- Wavelength: 1575~1580 nm (Rx) & 1260~1280 nm (Tx)
- Tx output: 4~9 dBm, RX sensitivity: -28 dBm
- Physical distance reach to 20 km
- Supports up to 8 T-CONs each with priority queues (US)
- Supports up to 32 GEM ports
- Flexible mapping between T-CONT and GEM port
Layer 2 networking features
- MAC address learning
- MAC filtering
- Multicast transparent
- IPv6 address transparent
Multicast
- IGMP v2/v3 snooping
- IGMP immediate leave
- IPv6 MLD v1/v2 snooping
VLAN functional specifications
- VLAN IEEE 802.1Q
- Supports protocol-based VLAN
- 1:1 VLAN, N:1 VLAN, VLAN transparent bridge
- LAN port-based VLAN tag add and tag removal
- QinQ VLAN
QoS
- 802.1p priority with 8 queues
- Classification based on VLAN ID, 802.1p, VLAN ID + 802.1p
- Scheduling mode: strict priority, WRR
Management
- Standard OMCI (ITU-T G. 988)
- SSH (CLI)
- Web GUI (HTTPS)
- Firmware upgrade via HTTPS/OMCI
VoIP (Only PM7516-R0 support)
- SIP (Section Initiating Protocol, RFC 3261)
- Codec: G.711 a/μ (64K), G.726 (24/32K), G.722
- Fax/modem detection and pass-through
- Voice Active Detector (VAD) (silence suppression)
- Comfort Noise Generation (CNG)
- Supports fax T.38
- Dynamic jitter buffer
- DTMF detection and generation
- DTMF relay by in-band and out-of-band (RFC 2833, SIP INFO)
- SIP account (URL type included)
- Caller ID
- Call forwarding (no condition, busy, no answer)
- Call transferring (attended, unattended)
- Call hold/call retrieve
- Three-way conference (local mixer)
- Call waiting
Hardware specifications
- WAN: one XGS-PON (with SC/APC connector)
- LAN: one RJ45 port (with 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, 10 Gbps data rates)
- VoIP: one RJ11 port
- Reset: one reset button
- UPS: one 8-pin Molex connector for UPS power supply
- LED indicators:
- Power
- UPS
- PON
- VoIP
Power consumption
- 12 V DC/1 A
- 12 Watt max
Physical specifications
- Item dimensions (WxDxH): 145 x 125 x 45 mm (5.7” x 4.9” x 1.8”)
- Item weight:
- PM7516-R0: 345 g (0.76 lb.)
- PM7510-R0: 368 g (0.81 lb.)
- Packing dimensions (WxDxH): 233 x 170 x 53 mm (9.2” x 6.7” x 2.1”)
- Packing weight:
- PM7516-R0: 620 g (1.36 lb.)
- PM7510-R0: 664 g (1.46 lb)
Environment specifications
Operating environment
- Temperature: 0°C to 40°C (32ºF to 104ºF)
- Humidity: 10% to 90% RH (non-condensing)
Storage environment
- Temperature: -30°C to 70°C (-22ºF to 158ºF)
- Humidity: 10% to 95% RH (non-condensing)
Certification
- FCC, IC
- Safety: FDA, UL
Package contents
- Device
- Power adapter
- Ethernet cable Cat. 6
- Phone cable
- Quick Start Guide
*Please note that all specifications are subject to change without prior notice.
