802.11ac Wave2 Dual-Radio Unified Access Point
NWA5123-AC HD
NWA5123-AC HD |
---|
|
NWA5123-AC HD
|
---|---|
RF Specifications | |
802.11n/ac premium features |
|
Typical transmit output power (dBm) *1 |
|
Antenna gain |
|
Support data rate |
|
Receive sensitivity | Min. Rx sensitivity up to -103 dBm |
Interfaces | |
Number of 10/100/1000M LAN | 2 x switch ports |
Console port | 4-Pin serial |
Input power requirements | Direct DC power or Power over Ethernet (PoE)*2 |
PoE | 802.3at (full mode) 802.3af (Restrict 2.4G & 5G radio to one transmit stream only.) |
PoE power draw | 15.5 W (802.3at PoE) |
WLAN | |
WLAN maximum throughput | Up to 1600 Mbps |
Fast roaming | Pre-authentication and PMK caching |
Wireless Security |
|
Number of SSID | 16 |
QoS |
|
Network | |
IPv6 support | Yes |
VLANs | Yes |
DHCP client | Yes |
Management | |
Operating mode |
|
ZON Utility*4 |
|
Zyxel AP Configurator*5 |
|
Zyxel Wireless Optimizer *6 |
|
Standalone AP mode | Yes |
Managed AP mode | Yes |
CLI | Yes |
SNMP | v2c/v3 |
Standard Compliance | |
Ethernet |
|
PoE | IEEE 802.3af/at |
WLAN |
|
Certifications | |
Radio |
|
EMC |
|
Safety |
|
Physical Specifications and others | |
Item | Dimensions (WxDxH)(mm/in.) 211 x 223 x 39 / 8.31 x 8.78 x 1.54 Weight (g/lb.) 750/1.653 |
Packing | Dimensions (WxDxH)(mm/in.) 251 x 247 x 55/9.88 x 9.72 x 2.17 Weight (g/lb.) 990/2.182 |
Included accessories | Wall/ceiling mount plate |
Plenum rating | Yes |
Kensington lock support | Yes |
Power supply | Input: AC 100-240V, 50~60Hz Output: DC +12V 2A (Sold separately) |
MTBF (hr) | 4,134,738 |
Environmental Specifications | |
Operating | Temperature -20°C to 60°C / -4°F to 140°F Humidity 10% to 90% (Non-condensing) |
Storage | Temperature -40°C to 70°C / -40°F to 158°F Humidity 10% to 90% |
Notes:
*1. Maximum output power is limited by regional regulatory.
*2. When both power sources are available, DC power takes priority over PoE.
*3. Supports when working with Zyxel NXC controller.
*4. Support from ZON Utility V2.1 or above.
*5. Support from ZAC V1.1.4 or above.
*6. Support from ZWO V1.0.5 or above