4G LTE-A Indoor Router

LTE3301-PLUS

IP Networking

  • Cellular and Ethernet WAN failover and failback
  • Support IPv4/IPv6 dual stack
  • DHCP client/server
  • VPN pass through (PPTP/IPSec and L2TP pass-through)
  • Data roaming disable/enable
  • IP firewall
  • NAT/NAPT
  • Port forwarding/DMZ
  • DNS/DDNS
  • Supports router mode/bridge mode (IP pass through)
  • Primary WAN/secondary WAN management

WLAN Feature

  • Auto channel selection
  • WiFi Protected Setup (WPS)
  • WiFi Multimedia (WMM)
  • Security: none, WPA2-Personal
  • MAC address filtering with 32 address supported
  • Hide SSIDs
  • Up to of 32 WiFi clients
  • WLAN scheduling

Management

  • APN management
  • SIM PIN/PUK management
  • Secure remote management via TR-069/Web GUI
  • Network selection
  • Operating frequency band selection

LTE Air Interface

  • Standard compliant: 3GPP Release 10 Cat. 6
  • Support LTE band : 1/3/5/7/8/20/28/38/40/41
  • 2 Carrier Aggregation combination:
    • B1+B1/B5/B8/B20/B28
    • B3+B3/B5/B7/B8/B20/B28
    • B7+B5/B7/B8/B20/B28
    • B38+B38; B40+B40; B41+B41
  • Peak data rate:
    • 300 Mbps DL within 40 MHz bandwidth (CA)
    • 50 Mbps UL within 20 MHz bandwidth

UMTS Air Interface

  • Standard compliant: WCDMA band 1/3/5/8
  • Supported frequency: HSPA+/UMTS 2100/1800/900/850 MHz (band 1/3/5/8)
  • WCDMA : 2100/1800/900/850 MHz
  • HSPA+ downlink data rate up to 42 Mbps
  • HSUPA uplink data rate up to 5.76 Mbps

WiFi Air Interface

  • Wireless standard (concurrent)
    • IEEE802.11 b/g/n, 2.4 GHz
    • IEEE802.11 a/n/ac, 5 GHz
  • WiFi 2.4 GHz antenna: 2x2 internal antennas up to 3 dBi
  • WiFi 5 GHz antenna: 2x2 internal antennas up to 5 dBi

Hardware Interface

  • Four GbE RJ-45 LAN ports. LAN1 can be configured as Ethernet WAN port
  • LEDs:
    • Power indication
    • Internet status
    • LTE/3G signal strength
    • WiFi status
    • USB status
  • One WPS & WiFi On/Off button
  • One 3FF micro SIM card socket
  • One Reset to default button
  • One Power On/Off button
  • One DC Power jack
  • One USB 2.0 host port
  • Two external LTE/3G antenna SMA connector
  • External power supply: 110 - 240 V AC/12 V 1.5 A DC adaptor
  • Power consumption at peak: < 18 W
  • Item dimensions (WxDxH): 210 x 115 x 33 mm (8.27” x 6.06” x 1.57”)
  • Item weight: 500 g (1.10 lb)
  • Packing dimensions (WxDxH): 293 x 234 x 57 mm (11.53” x 9.21” x 2.24”)
  • Packing weight: 1050 g (2.31 lb.)

Operating Environment

  • Temperature: 0°C to 40°C (32°F to 104°F)
  • Humidity: 10% to 90% (non-condensing)

Storage Environment

  • Temperature: -30°C to 70°C (-22°F to 158°F)
  • Humidity: 5% to 95% (non-condensing)
  • CE: RED/ErP/Safety
  • WEEE
  • 2011/65/EC (RoHS) Restriction of Hazardous Substances Directive
  • Hazardous Substance Free (HSF)
  • European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging waste
  • Power adapter (12 V/1.5 A EU/US/UK plug)
  • Ethernet cable
  • External antenna x2
  • Quick start guide
  • Warranty card
  • CE DoC
  • Safety warning
  • The maximum wireless data transfer rate is derived from IEEE Standard 802.11 and 3GPP specifications close to AC1200. Actual data transfer rate will vary from network environment including: distance, network traffic, building site materials/construction, interference from other wireless devices, and other adverse conditions.

* All specifications are subject to change without notice.