802.11ac Wave 2 Wall-Plate Unified Access Point

WAC500H

Expand All Collapse All
  WAC500H
 
WAC500H
Wireless
Standard IEEE802.11 ac/n/g/b/a
MIMO MU-MIMO
Wireless speed 2.4 GHz:
  • 300Mbps
5 GHz:
  • 866Mbps
Frequency band 2.4 GHz
  • USA (FCC): 2.412 to 2.462 GHz
  • Europe (ETSI): 2.412 to 2.472 GHz
5 GHz
  • USA (FCC): 5.15 to 5.25 GHz; 5.725 to 5.850 GHz
  • European (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz
Bandwidth 20-, 40- and 80-MHz
Conducted typical transmit output power*1
(limited by local regulatory requirements)		 US (2.4GHz/5GHz)
  • 23/26dBm
EU (2.4GHz/5GHz)
  • 19/26dBm
RF Design
Antenna type 2x2 MIMO Embedded Antenna
Antenna gain 2.4GHz
  • 3 dBi
5GHz
  • 4 dBi
Minimum receive sensitivity Up to -99 dBm
WLAN feature
Band Steering Yes
WDS/Mesh*2 Yes
Fast roaming Pre-authentication, PMK caching and 802.11r/k/v
DCS Yes
Load balancing Yes
Security
Encryption
  • WEP
  • WPA
  • WPA2-PSK
  • WPA3
Authentication
  • WPA
  • WPA2-Enterprise
  • EAP
  • IEEE 802.1X
  • RADIUS authentication
Access management
  • L2-isolation
  • MAC filtering
Networking
IPv6 Yes
VLANs Yes
WMM Yes
U-APSD Yes
DiffServ marking Yes
Management
Operating mode
  • Nebula Cloud managed
  • Controller-managed
  • Standalone
ZON Utility
  • Discovery of Zyxel switches, APs and gateways
  • Centralized and batch configurations
    • IP configuration
    • IP renew
    • Device reboot
    • Device locating
    • Web GUI access
    • Firmware upgrade
    • Password configuration
Zyxel Wireless Optimizer
  • WiFi AP planning
  • WiFi coverage detection
  • Wireless health management
Web UI/ CLI Yes
SNMP Yes
Physical Specifications
Item Dimensions (WxDxH)(mm/in.)
173 x 97 x 29 / 6.81 x 3.82 x 1.14
Weight (g/lb.)
223/0.49
Packing Dimensions (WxDxH)(mm/in.)
195 x 120 x 53 / 7.68 x 4.72 x 2.09
Weight (g/lb.)
444/0.98
Included accessories Multi-purpose mounting bracket with screws
MTBF(hr) 542,017
Physical Interfaces
Ethernet port
  • 1x 10/100/1000M uplink
  • 2x 10/100/1000M downlink (Including one PoE PSE)
Power
  • Input: AC 100 - 240V - 50/60 Hz 0.3A; Output: DC +12V 1A (PoE PSE disabled)
  • PoE 802.3at: power draw 18 W (Include 7W for PoE PSE)
  • PoE 802.3af: power draw 11 W (PoE PSE disabled)
Environmental Specifications
Operating Temperature
0°C to 50°C/32°F to 122°F
Humidity
10% to 90% (non-condensing)
Storage Temperature
-40°C to 70°C/-40°F to 158°F
Humidity
10% to 90% (non-condensing)
Certifications
Radio
  • FCC Part 15C
  • FCC Part 15E
  • ETSI EN 300 328
  • EN 301 893
  • LP0002
  • EN 60601-1-2
EMC
  • FCC Part 15B
  • EN 301 489-1
  • EN 301 489-17
  • EN55022
  • EN55024
  • EN61000-3-2/-3
  • BSMI CNS13438
Safety
  • EN 60950-1
  • IEC 60950-1
  • BSMI CNS14336-1

All specifications are subject to change without notice.
*1 Conducted typical transmit output power excludes antenna gain. For total (EIRP) transmit power, add antenna gain.
*2 WDS, ZyMesh, Smart Mesh and Industry’s Open Mesh, Easy Mesh are different mesh systems that do not work with one another.