Nebula FWA 5G Outdoor/Indoor Router
Nebula FWA70
System specifications
IP networking
Supports IPv4/IPv6 dual stack (NDP IPv6)
DHCP server
ICMP supported
Virtual Private Network (VPN) pass-through
NAT
Supports NAT/NAPT
Supports NAT enable/disable
Supports port forwarding
Supports port triggering
Supports DMZ/ALG
Routing
Supports router mode or bridge (IP pass-through) mode
Supports dynamic DNS for first APN
Supports remote management under bridge mode
IP firewall
Firewall can be enabled or disabled via GUI DoS attack detection
Supports SPI
Application-level firewall
Filters LAN MAC address
Filters LAN IP address
Filters URLs
Management
Supports local/remote device management (HTTP, HTTPS)/Web GUI and firmware upgrade
Supports TR-069 remote firmware upgrade management with TR-181 data model
APN management
PIN/PUK management
Network selection
Network preference
Operating frequency band selection
CLI/SSH (local and remote SSH access)
Supports UPnP IGD
Supports SSH with key access
Supports remote throughput testing by TR-143
Supports Zyxel One app (iOS and Android) for easy installation and local management
Supports device azimuth information reporting
Supports device power consumption reporting
Hardware specifications
5G NR interface
3GPP Release 16 standard-compliant
Supports both NSA and SA modes
FDD: n1/n3/n5/n7/n8/n20/n28
TDD: n38/n40/n41/n75/n77/n78
Supports DL 4×4 MIMO: n1/n3/n5/n7/n8/n20/n28/n38/n40/n41/n77/n78
Data rates:
5G SA: DL 7.01 Gbps; UL 2.5 Gbps*
5G NSA: DL 5.67 Gbps; UL 1.46 Gbps*
Supports DL modulation QPSK, 16-QAM, 64-QAM, and 256-QAM
Supports UL modulation QPSK, 16-QAM, 64-QAM, and 256-QAM
Output power:
Class 1.5: 29 dBm +2/-3 dBm for n41/n77/n78
Class 2: 26 dBm +2/-3 dBm for n41/n77/n78
Class 3: 23 dBm ±2 dBm for rest FDD/TDD 5G NR bands
4G LTE interface
3GPP Release 16 standard-compliant
Supports frequencies:
FDD: B1/B3/B5/B7/B8/B20/B28/B32
TDD: B38/B40/B41/B42/B43
Supports DL 4×4 MIMO: B1/B3/B5/B7/B8/B20/B28/B38/B40/B41/B42/B43
Peak data rates:
Max. DL 1.6 Gbps/UL 211 Mbps*
Supports DL modulation QPSK, 16-QAM, 64-QAM, and 256-QAM
Supports UL modulation QPSK, 16-QAM, 64-QAM, and 256-QAM
Output power:
Class 3: 23 dBm ±2 dBm for rest FDD/TDD LTE bands
Class 2: 26 dBm +2/-3 dBm for B41
5G/4G antennas
Four embedded directional antennas
Ultra-high band: up to 9 dBi peak gain
High band: up to 7 dBi peak gain
Middle band: up to 7 dBi peak gain
Low band: up to 1 dBi peak gain
Hardware interface
One 2.5GbE RJ-45 PoE LAN port
One troubleshooting USB port
Two LED indicators:
Device status
Signal strength
One reset button
One nano SIM card slot
Power consumption
<15 W (peak)
Power specifications
Standard IEEE 802.3af/at 2.5G PoE
Physical specifications
Item
Dimensions (LxWxH)
150 x 68 x 200 mm (5.91” x 2.68” x 7.87”)
Weight
660 g (1.46 lb.)
Packing
Dimensions (LxWxH)
275 x 225 x 100 mm (10.83” x 8.86” x 3.94”)
Weight
1360 g (3 lb.)
Environmental specifications
Operating
Temperature
-30°C to 55°C (-22°F to 131°F)
Humidity
5% to 95% RH (non-condensing)
Storage
Temperature
-40°C to 70°C (-40°F to 158°F)
Humidity
5% to 95% (non-condensing)
Ingress protection rating
IP55
Surge protection
K.21 6KV/DM 1.5KV
Wind load testing for Pole mounting
GR 487 issue 4 (2013) standard compliant
Level 12 wind force
Wind speeds 53.6 m/sec (~ 193 km/h)
Package contents
Device
Standard 802.3af/at 2.5G PoE injector
10m flat Ethernet cable white 8P8C
1.8 m Cat.6 Ethernet cable white 8P8C
Flat cable gland
Quick Start Guide
DoC and safety warning
Screws for wall mounting
Hose clamps for pole mounting
Certification
CE
UKCA
WEEE
HSF (Hazardous Substance Free)
European Parliament and Council Directive 94/62/EC of December 20, 1994 on packaging and packaging
All specifications are subject to change without notice.
- * The maximum data rate is a theoretical value. The actual data rates depend on the network environment.
- ** Wall-mount and pole-mount kits are included. Other mounting accessories are available as optional extras.