4G LTE-A CBRS CBSD Category B Outdoor Router

Zyxel LTE7485-S905 4G LTE-A CBRS CBSD Category B Outdoor Router with the support of Cat. 16 and 3.5 GHz CBRS band is a CPE-CBSD Category B with maximum 36 dBm per 10 GHz channel EIRP and SAS client built-in. Deliver lightning-fast internet connectivity through Fixed Wireless Access (FWA) with a better signal performance over extended distances.

SAS approved: Certified by Commscope, Federated Wireless, and Google.

  • Cat. 16/DL 580 Mbps
  • SAS-client
  • 4x4 MIMO 4G antennas
  • 802.3af/at PoE
  • Remote management
  • IP68-certified
  • Zyxel mobile app
Download resources

Lightning-fast internet connectivity

Zyxel LTE7485-S905 employs 3GPP UE downlink Category 16 – the high-level practice LTE-A technology with data rates of up to 580/30 Mbps through 8 spatial streams on 2 component carriers.

Enhance your service coverage with high-gain antennas

The FCC certified LTE7485-S905 and built-in SAS (Spectrum Access System) client allows you to increase your service reach because of high-power signal transmissions and 4x4 MIMO high-gain directional antenna of up to 13 dBi per element. The outdoor design enables it to work under near non-line-of-sight conditions to increase coverage.

Non-stop connectivity with “Dual-WAN Failover” design

The wireless LTE allows you to take advantage of the 2nd WAN without a cabling plan. As long as the gateway supports “Dual-WAN Failover”, you can just connect Zyxel LTE7485-S905 to the existing gateway and set LTE as the failover WAN and relieve the risk of network outage.


Network setup and management in hand

Zyxel LTE7485-S905 supports Zyxel Air, an in-house developed app for Zyxel Fixed Wireless Access devices. The simple, intuitive yet powerful app simplifies the setup, configuration, and management of your customers' home or office networks. Your technicians can provide prompt and satisfying services with reduced average service time for each customer.


Remote management for lower OPEX

With TR-069, TR-181 and TR-143 support, the Zyxel LTE7485-S905 effectively secures OPEX by reducing the frequency of on-site support and by providing simplified diagnostic, configuration and troubleshooting processes.

System specifications

IP networking
  • Supports IPv4/IPv6 dual stack (NDP IPv6)
  • DHCP server
  • Supports ICMP
  • Virtual Private Network (VPN) pass-through
  • Supports NAT/NAPT
  • Supports DMZ
  • Supports port forwarding/triggering
  • Supports ALG
  • Supports bridge/router modes
  • Supports dynamic DNS for first APN
  • Supports remote management under bridge mode
IP firewall
  • Firewall can be enabled or disabled via GUI
  • DoS attack prevention
  • Supports SPI
  • Application-level firewall
  • Filters LAN MAC address
  • Filters LAN IP address
  • Supports local/remote device management and firmware upgrade via TR-069 and web GUI
  • APN management
  • PIN management
  • CLI/SSH (local and remote SSH access)
  • Supports UPNP IGD
  • Supports SSH with key access
  • Supports bandwidth management
  • Supports mobile apps (iOS and Android)
  • Supports remote throughput testing (TR-143)
  • LTE Band Pilot system management compatible
  • SAS client built-in

Hardware specifications

LTE interface
  • Standard-compliant: 3GPP UE Category 16
  • Supports LTE band 48 (CBRS) (LTE TDD 3550-3700 MHz)
  • CBRS Category B CPE-CBSD
  • Supports DL TM1/2/3/4/6/7/8/9
  • LTE antennas: 4 embedded directional antennas of up to 13 dBi per element (4x4 MIMO)
  • Supports DL 2CC, 4x4 MIMO, 8 spatial streams
  • Supports DL up to 4 Carrier Aggregations, UL up to 2 Carrier Aggregations
  • Supports DL modulations: QPSK, 16-QAM, 64-QAM and 256-QAM
  • Supports UL modulations: QPSK, 16-QAM and 64-QAM
  • Supports DL speeds of up to 580 Mbps by TDD conf. 2*
  • Supports UL speeds of up to 30.2 Mbps by TDD conf. 2*
  • Max EIRP 36 dBm/10 MHz
WiFi interface for management
  • 802.11 n/g/b, 2.4 GHz
  • Hidden SSID
  • MAC address filtering
  • 2 embedded antennas
  • For local management purpose only
Hardware interface
  • One Gigabit RJ-45 PoE LAN port
  • One tri-color LED indicator for:
    • Power status
    • Internet status
    • WiFi status
  • One 3FF Micro SIM card socket
  • One WiFi on/off and WPS button
  • One reset and reboot button

Power interface

  • Standard 802.3af/at Power over Ethernet (PoE) PD support compatible
  • Power consumption at PoE: 13 W (peak)

Physical specifications

  • Item dimensions (WxDxH): 254 x 255 x 58 mm (9.99” x 10.03” x 2.28”)
  • Item weight: 1100 g (2.43 lb.)
  • Packing dimensions (WxDxH): 420 x 280 x 108 mm (16.54” x 11.02” x 4.25”)
  • Packing weight: 3050 g (6.72 lb.)

Environment specifications

Ingress Protection rating
  • IP68
Lightning protection
  • K.21 enhanced mode, 6 KV
Operating environment
  • Temperature: -40°C to 60°C (- 40°F to 140°F)
  • Humidity: 5% to 95% (non-condensing)
Storage environment
  • Temperature: -40°C to 70°C (-40°F to 158°F)
  • Humidity: 5% to 95% (non-condensing)


  • FCC
  • OnGo

Package contents

  • Gigabit PoE injector
  • Ethernet cable
  • Cable gland
  • Quick Start Guide
  • Wall/pole mounting kit
  • Grounding kit

*Please note that all specifications are subject to change without prior notice.



File type Model Version Release date Language Download
Datasheet LTE7485-S905 2 English
Quick Start Guide LTE7485-S905 001 English
Users Guide LTE7485-S905 1.00_2.00 ED6 English

Other resources


LTE CBRS routers for hard-to-reach customers | Zyxel


How to install Zyxel 5G/4G LTE outdoor routers


Zyxel comprehensive solutions for 5G & 4G LTE

Contact us



Please use this inquiry form if you are an internet service provider (ISP). We will get back to you shortly after your submission.

Information here.