Latest Release
Knowledge Base
| Topic | Type | Release Date |
|---|---|---|
| iOS provisioning supports iPhone only. How to provision the IKEv2 profile on iPad? | Application / Configuration Example | Nov.10.2020 |
| How to configure OSPF with VTI between two USG/ZyWALL? | Application / Configuration Example | Nov.10.2020 |
| Why can't I build the L2TP tunnel after installing the Zywall VPN client? | General Info | Nov.10.2020 |
| Low or unstable wireless client throughput between Access Points and 10G Multi-Gigabit switch ports. | General Info | Nov.10.2020 |
| What does the log 'memory leak' mean? | General Info | Nov.9.2020 |
| How to enable the wireless bridge when I'm using the smart mesh? | General Info | Nov.9.2020 |
| How to use Wi-Fi tag? | General Info | Nov.9.2020 |
| Why does the NAS540/NAS520/NAS326 RAID volume status show up as “degraded” on the web interface and what should be done? | TroubleShooting | Nov.4.2020 |
| Which WAN link rate does EX5501-B0 2.5G WAN port support? | General Info | Oct.30.2020 |
| How to download config file from "standby" partition? | General Info | Oct.7.2020 |
How to Video
How to Install Zyxel Outdoor Enclosure for Your Access Point - Wall Mount Installation
Zyxel Outdoor Enclosure for Your Access Point
ZyWALL VPN2S VPN Firewall - Secured VPN Access Designed for Remote Workers
Access ZyXEL Personal Cloud Anywhere
USG Series - Client-To-Site VPNHD
USG and NAS - How to Setup a NAT Rule (Port Forwarding)
USG - How to Reactivate Web Interface via SSH
USG - How to Reactivate Web Interface via Serial Connection
USG60W - How to Setup DNS
Zyxel USG Series - How to Setup an SSL VPN
Zyxel USG Series - How to Set Up Bandwidth Management (BWM)