4G LTE-A Outdoor Router

LTE7461-M602

IP Networking

  • Supports IPv4/IPv6 dual-stack (NDP IPv6)
  • DHCP server
  • ICMP supported
  • Virtual Private Network (VPN) passthrough
  • Supports NAT/NAPT
  • Supports DMZ
  • Supports port forwarding/triggering
  • Supports ALG

Routing

  • Supports bridge/router modes
  • Supports dynamic DNS for first APN
  • Supports remote management under bridge mode

IP Firewall

  • Firewall can be enabled or disabled via GUI
  • DoS attack detection
  • Supports SPI
  • Application-level Firewall
  • Filters LAN MAC address
  • Filters LAN IP address
  • Filters URLs

Management

  • Supports local/remote device management and firmware upgrade via TR-069 and Web GUI
  • APN management
  • PIN/PUK management
  • Network selection
  • Network preference
  • Operating frequency band selection
  • CLI/SSH (local and remote SSH access)
  • Supports UPNP IGD
  • Supports SSH with key access
  • Supports bandwidth management
  • Supports mobile app (iOS and Android)
  • Supports remote throughput testing (TR-143)
  • LTE Band Pilot System management compatible

LTE Interface

  • Standard-compliant: 3GPP UE Category 6
  • Supports LTE bands: 2/4/5/7/12/13/25/26/29/66
  • Supports WCDMA bands: 2/4/5
  • Peak data rate:
    LTE-FDD: max 300 Mbps (DL) max 50 Mbps (UL)*
  • 2 DL Carrier Aggregation combination:
    B2+B2/B5/B12/B13/B26/B29; B4+B4/B5/B12/B13/B26/B29; B7+B5/B7/B12/B13/B26/B29; B25+B5/B12/B13/B25/B26/B29; B66+B5/B12/B13/B26/B29/B66; (B29 is only for secondary component carrier)
  • LTE antennas: 2 embedded directional antennas of up to 8 dBi/element (2x2 MIMO)
  • Supports DL modulation QPSK, 16-QAM, 64-QAM
  • Supports UL modulation QPSK and 16-QAM
  • Max EIRP 30 dBm
  • 13 watt (peak) – at PoE

Hardware Interface

  • One GbE RJ-45 PoE LAN port
  • One tri-color LED indicator for
    • Power status
    • Internet status
    • WiFi status
  • One WiFi On/Off and WPS button
  • One 3FF micro SIM card slot
  • One Reset & Reboot default button

Power Interface

  • Standard IEEE 802.3af/at PoE PD support compatible

WiFi Interface for Management

  • 802.11 n/g/b, 2.4 GHz
  • Hidden SSID
  • MAC address filtering
  • 2x2 embedded antennas
  • For local management purpose only

Physical Specification

  • Dimensions (WxDxH): 254 x 255 x 58 mm (9.99” x 10.03” x 2.28”)
  • Weight: 1100 g (2.43 lb.)
  • Package dimensions (WxDxH): 420 x 280 x 108 mm (16.54” x 11.02” x 4.25”)
  • Package weight: 3050 g (6.72 lb.)

Ingress Protection Rating

  • IP68

Lightning Protection

  • K.21 enhanced mode, 6 kV

Operating Environment

  • Temperature: -40°C to 60°C (40°F to 140°F)
  • Humidity: 5% to 95% (non-condensing)

Storage Environment

  • Temperature: -40°C to 70°C (-40°F to 158°F)
  • Humidity: 5% to 95% (non-condensing)
  • FCC/IC/AT&T/Verizon
  • Gigabit PoE injector with LED indicator
  • Ethernet cable
  • Power cord
  • Cable gland
  • Quick start guide
  • Wall/pole mounting kit
  • The maximum wireless data transfer rate is derived from 3GPP specifications close to UE Category 6. The actual data transfer rate will vary from network environment including distance, network traffic, building site materials /construction, interference from other wireless devices, and other adverse conditions.

* All specifications are subject to change without notice.