Nebula 5G AX3000 5G Indoor Router

Nebula FWA505v2

System specifications

IP networking

Supports IPv4/IPv6 dual stack, IPv6 only

DHCP client/server

ICMP supported (LAN and/or WAN, disable)

Virtual Private Network (VPN) pass through (PPTP/IPSec and L2TP pass-through)

Multiple APN (at least 2 APNs)

NAT

Supports NAT/NAPT

Supports NAT enable/disable

Supports port forwarding

Supports DMZ

Routing

Support Bridge/Router Mode (ability to perform remote login when bridge mode enabled)

Support Dynamic DNS for first APN

Static/dynamic route setting

Address Resolution Protocol (ARP)

IP firewall

Firewall can be enabled or disabled via GUI

SPI (Stateful Packet Inspection)

DoS Attack Detection

Application-Level Firewall (LAN to WAN such as HTTP, Telnet, Ping)

Filters LAN MAC address (Black/white list)

Filters LAN IP address

Filters URL

Management

Local/Remote management (HTTP, HTTPS) and firmware upgrade

Support TR-069/TR-369 remote firmware upgrade

Support TR-111 STUN for TR-069 management NAT pass through

Support TR-143 throughput testing (UDP/TCP, DL/UL, http/https)

S-NSSAI mapping, Slice/Service type (SST)/Slice Differentiator (SD)

FOTA (Manual /Auto)

SMS management

SMS application

APN management

PIN/PUK management

Roaming disable/enable

Network selection

Network preference

Operating frequency band selection

CLI/SSH (Local and remote SSH access)

UPNP IGD supporting

Ethernet over IP (L2 over L3) pass through

SSH with key access

Certificate Management

Web server API to support APPs

Multiple language support

WLAN feature

Multiple SSID/Hide SSID

Wireless Protection Setup (WPS)

WiFi Multimedia (WMM) QoS

Encryption: None, WPA2-Personal, WPA/WPA2

Authentication: Advanced Encryption Standard (AES), TKIP and AES hybrid encryption algorithm.

Auto/Fixed Channel Selection

WLAN Scheduling

WiFi-enabled devices: up to 64

Band steering (enable/disable)

Compliant to EasyMesh R2 standard

Hardware specifications

5G NR interface

3GPP Release 15 standard-compliant

Supports both NSA and SA modes
FDD: n1/n3/n7/n8/n20/n28
TDD: n38/n40/n41/n75/n76/n77/n78

Supports DL 4×4 MIMO

Data rates:
5G SA: DL 4.67 Gbps; UL 1.25 Gbps*
5G NSA: DL 4.67 Gbps; UL 836 Mbps*

Supports DL modulation QPSK, 16-QAM, 64-QAM, and 256-QAM

Supports UL modulation QPSK, 16-QAM, 64-QAM, and 256- QAM

Output power:
Class 2 (26 +2/-3 dBm) for n41/ n77/n78
Class 3 (23 ±2.7dBm) for all other 5G NR bands

4G LTE interface

3GPP Release 16 standard-compliant

Supports frequencies:
FDD: B1/B3/B5/B7/B8/B20/B28/B32
TDD: B38/B40/B41/B42/B43

Supports DL 4×4 MIMO: B1/B3/B5/B7/ B8/B20/B28/B38/B40/B41/B42/B43

Peak data rates:
Max. DL 1.6 Gbps/UL 211 Mbps*

Supports DL modulation QPSK, 16-QAM, 64-QAM, and 256-QAM

Supports UL modulation QPSK, 16-QAM, 64-QAM, and 256- QAM

Output power:
Class 3: 23 dBm for all other LTE bands
Class 2: 26 dBm for B41

5G/4G antennas

Four embedded omni-directional antennas

Antenna spec (Peak gain)
Low band: < 2 dBi
Middle band: < 3 dBi
High band: 3 to 5 dBi
Ultra-high band: < 5 dBi

WiFi air Interface

Wireless standard: IEEE 802.11 a/b/g/n/ac/ax

Wireless speeds:
Link rates up to 3,000 Mbps* for 802.11ax

Internal WiFi antenna:
Dual-band & concurrent 2.4G 2x2 + 5G 3x3 (2ss)

WiFi antenna gain:
~3.5 dBi for 2.4 GHz
~4.5 dBi for 5 GHz

Hardware interface

Two 100/1000 Mbps Ethernet RJ-45 LAN ports, LAN2 can be configured for Ethernet WAN port

LED indicators:
Power/system
WAN/Internet
5G/4G LTE strength
WiFi/WPS status

One WPS button

One 4FF Nano SIM card slot (push-push type)

One reset button

One power on/off button

Power jack

Power consumption

< 15 W (peak)

Physical specifications

Item

Dimensions (LxWxH)
149 x 41 x 194 mm (5.87” x 1.61” x 7.64”)

Weight
468 g (1.03 lb.)

Packing

Dimensions (LxWxH)
262 x 58 x 236 mm (10.31” x 2.28” x 9.29”)

Weight
903 g (1.99 lb.)

Environmental specifications

Operating

Temperature
-10°C to 40°C (14°F to 104°F)

Humidity
0% to 90% RH (non-condensing)

Storage

Temperature
-30°C to 70°C (-22°F to 158°F)

Humidity
0% to 95% (non-condensing)

Certification

CE

UKCA

Package contents

Power adaptor, DC 12 V/2 A

Ethernet cable 2m 8P8C

Quick Start Guide & User’s Guide via QR Code

Safety warning (CE DoC included)

All specifications are subject to change without notice.

  1. * The maximum data rate is a theoretical value. The actual data rates depend on the network environment.
  2. ** 5% additives and solvents are necessary to be added to the recycled polymers to achieve the desired technical characteristics of the material.