Your browser either does not support JavaScript or you have turned JavaScript off.

4G LTE-A Outdoor Router

System Specifications

IP Networking

  • Support IPv4/IPv6 dual stack (NDP IPv6)
  • DHCP server
  • ICMP supported
  • Virtual Private Network (VPN) pass through
  • Support NAT/NAPT
  • Support DMZ
  • Support port forwarding/triggering
  • Support ALG

Routing

  • Support bridge/router mode
  • Support dynamic DNS for first APN
  • Support remote management under bridge mode

IP Firewall

  • Firewall can be enabled or disabled via GUI
  • DoS attack detection
  • Support SPI
  • Application-level Firewall
  • Filters LAN MAC address
  • Filters LAN IP address
  • Filters URLs

Management

  • Support local/remote device management and firmware upgrade via TR-069 and Web GUI
  • APN management
  • PIN/PUK management
  • Network selection
  • Network preference
  • Operating frequency band selection
  • CLI/SSH (local and remote SSH access)
  • Support UPNP IGD
  • Support SSH with key access
  • Support bandwidth management
  • Support mobile app (iOS and Android)
  • Support remote throughput testing (TR-143)

LTE Interface

  • Standard compliant : 3GPP UE Category 6
  • Supports LTE band: 2/4/5/7/12/13/25/26/29/66
  • Supports WCDMA band: 2/4/5
  • Peak data rate:
    LTE-FDD: max 300 Mbps (DL) max 50 Mbps (UL)*
  • 2 DL Carrier Aggregation combination:
    B2+B2/B5/B12/B13/B26/B29; B4+B4/B5/B12/B13/B26/B29; B7+B5/B7/B12/B13/B26/B29; B25+B5/B12/B13/B25/B26/B29; B66+B5/B12/B13/B26/B29/B66; (B29 is only for secondary component carrier)
  • LTE antennas: 2 embedded directional antennas of up to 8 dBi/element (2x2 MIMO)
  • Supports DL modulation QPSK, 16-QAM, 64-QAM
  • Supports UL modulation QPSK and 16-QAM
  • Max EIRP 30 dBm

  • 13 watt (peak) – at PoE

Hardware Interface

  • One GbE RJ-45 PoE LAN port
  • One tri-color LED indicator for
    • Power status
    • Internet status
    • WiFi status
  • One WiFi On/Off and WPS button
  • One 3FF micro SIM card slot
  • One Reset & Reboot default button

Power Interface

  • Standard IEEE 802.3af/at PoE PD suport compatible

WiFi Interface for Management

  • 802.11 n/g/b, 2.4 GHz
  • Hidden SSID
  • MAC address filtering
  • 2x2 embedded antennas
  • For local management purpose only

Physical Specification

  • Dimensions (WxDxH): 254 x 255 x 58 mm (9.99” x 10.03” x 2.28”)
  • Weight: 1100 g (2.43 lb.)
  • Package dimensions (WxDxH): 420 x 280 x 108 mm (16.54” x 11.02” x 4.25”)
  • Package weight: 3050 g (6.72 lb.)

Ingress Protection Rating

  • IP67

Lightning Protection

  • K.21 enhanced mode, 6 kV

Operating Environment

  • Temperature: -40°C to 60°C (40°F to 140°F)
  • Humidity: 5% to 95% (non-condensing)

Storage Environment

  • Temperature: -40°C to 70°C (-40°F to 158°F)
  • Humidity: 5% to 95% (non-condensing)

  • FCC/IC/AT&T

  • Gigabit PoE injector with LED indicator
  • Ethernet cable
  • Power cord
  • Cable gland
  • Quick start guide
  • Wall/pole mounting kit
  • The maximum wireless data transfer rate is derived from 3GPP specifications close to UE Category 6. Actual data transfer rate will vary from network environment including: distance, network traffic, building site materials/construction, interference from other wireless devices, and other adverse conditions.

*All specifications are subject to change without notice.

Related Links

Product Registration