LTE3301-PLUS 4G LTE-A Indoor Router - Specifications | Zyxel

System Specifications

IP Networking

Cellular and Ethernet WAN failover and failback
Support IPv4/IPv6 dual stack
DHCP client/server
VPN pass through (PPTP/IPSec and L2TP pass-through)
Data roaming disable/enable
IP firewall
NAT/NAPT
Port forwarding/DMZ
DNS/DDNS
Supports router mode/bridge mode (IP pass through)
Primary WAN/secondary WAN management

WLAN Feature

Auto channel selection
WiFi Protected Setup (WPS)
WiFi Multimedia (WMM)
Security: none, WPA2-Personal
MAC address filtering with 32 address supported
Hide SSIDs
Up to of 32 WiFi clients
WLAN scheduling

Management

APN management
SIM PIN/PUK management
Secure remote management via TR-069/Web GUI
Network selection
Operating frequency band selection

Hardware Specifications

LTE Air Interface

Standard compliant: 3GPP Release 10 Cat. 6
Support LTE band : 1/3/5/7/8/20/28/38/40/41
2 Carrier Aggregation combination:
- B1+B1/B5/B8/B20/B28
- B3+B3/B5/B7/B8/B20/B28
- B7+B5/B7/B8/B20/B28
- B38+B38; B40+B40; B41+B41
Peak data rate:
- 300 Mbps DL within 40 MHz bandwidth (CA)
- 50 Mbps UL within 20 MHz bandwidth

UMTS Air Interface

Standard compliant: WCDMA band 1/3/5/8
Supported frequency: HSPA+/UMTS 2100/1800/900/850 MHz (band 1/3/5/8)
WCDMA : 2100/1800/900/850 MHz
HSPA+ downlink data rate up to 42 Mbps
HSUPA uplink data rate up to 5.76 Mbps

WiFi Air Interface

Wireless standard (concurrent)
- IEEE802.11 b/g/n, 2.4 GHz
- IEEE802.11 a/n/ac, 5 GHz
WiFi 2.4 GHz antenna: 2x2 internal antennas up to 3 dBi
WiFi 5 GHz antenna: 2x2 internal antennas up to 5 dBi

Hardware Interface

Four GbE RJ-45 LAN ports. LAN1 can be configured as Ethernet WAN port
LEDs:
- Power indication
- Internet status
- LTE/3G signal strength
- WiFi status
- USB status
One WPS & WiFi On/Off button
One 3FF micro SIM card socket
One Reset to default button
One Power On/Off button
One DC Power jack
One USB 2.0 host port
Two external LTE/3G antenna SMA connector

Power Specification

External power supply: 110 - 240 V AC/12 V 1.5 A DC adaptor
Power consumption at peak: < 18 W

Physical Specifications

Item dimensions (WxDxH): 210 x 115 x 33 mm (8.27” x 6.06” x 1.57”)
Item weight: 500 g (1.10 lb)
Packing dimensions (WxDxH): 293 x 234 x 57 mm (11.53” x 9.21” x 2.24”)
Packing weight: 1050 g (2.31 lb.)

Environment Specifications

Operating Environment

Temperature: 0°C to 40°C (32°F to 104°F)
Humidity: 10% to 90% (non-condensing)

Storage Environment

Temperature: -30°C to 70°C (-22°F to 158°F)
Humidity: 5% to 95% (non-condensing)

Compliance & Certifications

CE: RED/ErP/Safety
WEEE
2011/65/EC (RoHS) Restriction of Hazardous Substances Directive
Hazardous Substance Free (HSF)
European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging waste

Package Contents

Power adapter (12 V/1.5 A EU/US/UK plug)
Ethernet cable
External antenna x2
Quick start guide
Warranty card
CE DoC
Safety warning

The maximum wireless data transfer rate is derived from IEEE Standard 802.11 and 3GPP specifications close to AC1200. Actual data transfer rate will vary from network environment including: distance, network traffic, building site materials/construction, interference from other wireless devices, and other adverse conditions.

* All specifications are subject to change without notice.

Related Links