4G LTE-A Pro interiérové IAD zařízení

LTE5398-M904

System specifications


IP networking

Cellular and Ethernet WAN failover and failback

Supports IPv4/IPv6 dual stack

DHCP client/server

VPN pass-through (PPTP/IPSec and L2TP pass-through)

Data roaming disable/enable

IP firewall

NAT/NAPT

Port forwarding/DMZ

DNS/DDNS

Supports router mode/bridge modes (IP pass-through)

Primary WAN/secondary WAN management

WLAN feature

Auto channel selection

WiFi Protected Setup (WPS)

WiFi Multimedia (WMM)

Security: none, WPA2-Personal, WPA+WPA2

Multiple SSIDs/hide SSIDs

WLAN scheduling

Up to 32 WiFi client per band

Management

APN management

SIM PIN/PUK management

SMS management

Network selection

Operating frequency band selection

Supports Zyxel Air app (iOS and Android) for easy installation and local management only

Hardware specifications


LTE Air interface

Standard-compliant:
3GPP Release 12 Cat. 18

Supports LTE bands:
LTE FDD: B1/B3/B5/B7/B8/B20/B28
LTE TDD: B38/40/41

Carrier-aggregation up to 5 (more detail information please contact with local sales)

Peak data rates:
1200 Mbps DL within 80 MHz bandwidth (CA)
150 Mbps UL within 40 MHz bandwidth (intra-band CA)

UMTS Air interface

Standard-compliant:
WCDMA bands B1/3/5/8

Supported frequencies:
HSPA+/UMTS 2100/1800/900/ 850 MHz (bands 1/3/5/8)
HSPA+ downlink data rates up to 42 Mbps
HSUPA uplink data rates up to 5.76 Mbps

WiFi Air interface

Wireless standard (concurrent)
IEEE 802.11 b/g/n, 2.4 GHz
IEEE 802.11 a/n/ac, 5 GHz

WiFi 2.4 GHz antenna:
2x2 internal antennas up to 3 dBi

WiFi 5 GHz antenna:
4x4 internal antennas up to 5 dBi

Hardware interface

Two GbE RJ-45 LAN ports. LAN1 can be configured as Ethernet WAN port

One voice port

LEDs (from left to right on the panel):
Power/USB (green/blue)
Internet (green)
LTE signal strength (green/red/orange)
WiFi/WPS (green)

One WPS & WiFi on/off button

One 3FF micro SIM card socket

One reset to default button

One power on/off button

One DC power jack

One USB 2.0 host port

Two external LTE/3G SMA connectors

Power consumption

24 W (peak)

Physical specifications


Item

Dimensions (WxDxH):
100 x 100 x 205 mm (3.94” x 3.94” x 8.07”)

Weight:
599 g (1.32 lb.)

Packing

Dimensions (WxDxH):
247 x 170 x 120 mm (9.72” x 6.7” x 4.73”)

Weight:
1600 g (3.54 lb.)

Environment specification


Operating environment

Temperature:
0°C to 40°C (32°F to 104°F)

Humidity:
10% to 90% (non-condensing)

Storage environment

Temperature:
-30°C to 70°C (-22°F to 158°F)

Humidity:
5% to 95% (non-condensing)

Certification


CE

Package contents


Power adapter (12 V/2 A EU/US/UK plug)

Ethernet cable

Quick start guide

Warranty card

CE DoC

Safety warning


  1. *1. All specifications are subject to change without notice.
  2. *2. The maximum wireless data transfer rate is derived from IEEE Standard 802.11 and 3GPP specifications close to AC2050. Actual data transfer rate will vary from network environment including: distance, network traffic, building site materials/construction, interference from other wireless devices, and other adverse conditions.