System Specifications
Standard
- Compliant with HomePlug AV2
- IEEE 1901 and HomePlug AV standard
Powerline Data Rate
- Transmit: up to 1200 Mbps*
- Receive: up to 1200 Mbps*
Access Methods
- CSMA/CA channel-access schemes
Range
- Max. range up to 300 meters over power line
Power Saving Mode
- When there is no Ethernet link in 60 seconds
Security
Quality of Service (QoS)
- ToS
- Supports up to 4-level type QoS
Frequency Band
Dynamic Neighbor Network Support
IGMP
System Requirements
- Operating system independent:
- Utility Software OS support:
- Microsoft Windows XP/Vista/7/8
Hardware Specifications
- Ethernet interface: One 10/100/1000 Mbps RJ-45 connector with auto MDI/MDIX support
- LED indicators:
- Power on/off
- Powerline network quality:
- Green: Best; Amber: Better; Red: Good
- Ethernet link/activity
- Button:
- Power rating: 100 to 240 V AC, 50/60 Hz
- Power consumption:
- Full operation: 4 watt max.
- Power-saving mode: 0.5 watt max.
- Plug type:
 |
EU type: Two pins for EU 220 V
|
 |
US type: Three pins for US 120 V
|
 |
UK type: Three pins for UK 240 V
|
Physical Specifications
- Item dimensions (WxDxH): 90 x 60 x 27 mm (3.54" x 2.36" x 1.06")
- Item weight: 95 g (0.21 lb.)
- Packing dimensions (WxDxH): 151 x 176 x 85 mm (5.94" x 6.92" x 3.34")
- Packing weight: 355 g (0.78 lb.)
Environmental Specifications
- Operating Environment
- Temperature: 0°C to 40°C (32°F to 104°F)
- Humidity: 10% to 90% (Non-condensing)
- Storage Environment
- Temperature: -30°C to 70°C (-22°F to 158°F)
- Humidity: 10% to 95% (Non-condensing)
Certification
- Safety: CE-LVD, IEC
- EMC: CE, FCC, BSMI
Packing Contents
- Powerline adapter
- Ethernet cable
- Quick start guide
- Support CD
- Warranty card
* The theoretical maximum channel data transfer rate is derived from HomePlug AV2 specifications. Actual data transfer rate will vary from network environment including: distance, network traffic, noise on electrical wires, quality of electrical installation and other adverse conditions.
** The MIMO transmission is limited with the ground pin environments such as connectivity, distance, quality of electrical installation and other adverse conditions.
*** Future request by project based.