Models

NAP102
  • 802.11ac Dual-radio Nebula Cloud Managed Access Point
NAP203
  • 802.11ac Dual-radio Dual-optimized Antenna 3x3 Nebula Cloud Managed Access Point
NAP303
  • 802.11ac Dual-radio Smart Antenna 3x3 Nebula Cloud Managed Access Point
NAP353
  • 802.11ac Dual-Radio External Antenna 3x3 Outdoor Access Point

RF Specifications

802.11n/ac premium features

NAP102

  • 2x2 Multiple-Input Multiple-Output (MIMO) with two spatial streams

NAP203

  • 3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams

NAP303

  • 3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams

NAP353

  • 3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams
  • Maximal Ratio Combining(MRC)
  • 20-, 40- and 80-Mhzchannels
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU(Tx/Rx)
  • Cyclic Delay Diversity(CSD) support
  • Maximum Likelihood Demodulation (MLD)support
  • Low Density Parity Check(LDPC) support
Antenna system

NAP102

  • Embedded Internal Antenna

NAP203

  • Dual-optimized internal antenna

NAP303

  • 6 embedded smart antenna

NAP353

  • 6 N-type connectors *
Antenna gain

NAP102

  • 2.4 GHz 3 dBi; 5 GHz 4 dBi

NAP203

  • Ceiling: 2.4 GHz 3 dBi; 5 GHz 4 dBi
  • Wall: 2.4 GHz 4 dBi; 5 GHz 5 dBi

NAP303

  • 2.4 GHz, 4 dBi; 5 GHz, 6 dBi

NAP353

  • -
Support Data Rate

NAP102

  • 802.11 a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24,36, 48, and 54 Mbps
  • 802.11n: up to 300 Mbps in MCS15(40 MHz; GI = 400 ns)
  • 802.11ac: up to 866 Mbps in MCS9 (80 MHz; 2 spatial streams; GI = 400 ns)

NAP203 and NAP303

  • 802.11a/g: 1, 2, 5.5, 6, 9,11, 12, 18, 24, 36, 48, and 54 Mbps
  • 802.11n: up to 450 Mbpsin MCS23 (40 MHz)
  • 802.11ac: up to 1300Mbps in MCS9 (80 MHz)

NAP353

  • 802.11a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
  • 802.11n: up to 450 Mbps in MCS15 (40 MHz)
  • 802.11ac: up to 1300 Mbps in MCS9 (80 MHz)
Receive Sensitivity

NAP102

  • Min. Rx sensitivity up to to -99 dBm

NAP203, NAP303 and NAP353

  • Min. Rx sensitivity up to -102 dBm

Note: * The antenna is not embedded and external antennas are separately sold.

WLAN

WLAN Maximum Throughput

NAP102

  • Up to 450 Mbps

NAP203, NAP303 and NAP353

  • Up to 900 Mbps
Wireless Security
  • WEP
  • WPA/WPA2-PSK
  • WPA/WPA2-Enterprise
  • Multiple EAP types
  • IEEE802.1X
  • MAC filtering
  • Layer-2 isolation
  • RADIUS authentication
  • More encryption supported and captive portal
Network
  • VLANs
  • DHCP Client
QoS (PG)
  • WMM
  • WMM Power Save
  • DiffServ Marking

Physical Interfaces

Number of 10/100/1000M LAN

NAP102 and NAP353

  • 1

NAP203 and NAP303

  • 2
Console port

NAP102 and NAP203

  • 4-Pin Serial

NAP303 and NAP353

  • RJ-45 serial
PoE Power Draw

NAP102

  • 9W

NAP203

  • 12.48W (802.3at PoE)*

NAP303

  • 17.04W

NAP353

  • 25W
Input power

NAP102

  • 12VDC, 1A

NAP203

  • 802.3at PoE Only (No DC jack)

NAP303

  • DC input: 12 VDC 2 A; PoE: 802.3at compliant (Power adapter is sold separately)

NAP353

  • PoE: 802.3at compliant

Note: * Max. power draw is 12.48 W. In extreme cases, the inrush current is greater than 802.3af limit, thus 802.3at PoE is required.

Standard Compliance

Ethernet

NAP102

  • IEEE 802.3
  • IEEE 802.3u

NAP203, NAP303 and NAP353

  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.11ab
  • IEEE 802.3au
  • IEEE 802.3az
  • IEEE 802.3at
PoE

NAP102

  • IEEE 802.3af

NAP203

  • IEEE 802.3at

NAP303

  • IEEE 802.3at*2

NAP353

  • IEEE 802.3at
WLAN
  • 802.11b: DBPSK, DQPSK, CCK
  • 802.11g: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11a: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM

Note: *Compatible with 802.3af mode with restricted function: 1x3 MIMO with 1 spacial stream.

Certifications

Radio

NAP102

  • ETSI EN 300 328 V1.7.1 : 11-2006
  • EN 301 893 V1.5.1
  • FCC Part 15.247
  • FCC Part 15E
  • LP0002
  • EN 60601-1-2 : 2007

NAP203, NAP303 and NAP353

  • FCC Part 15C
  • FCC Part 15E
  • ETSI EN 300 328
  • EN 301 893
  • LP0002
EMC

NAP102

  • EN 301 489-1 V1.8.1: 11-2008
  • EN 301 489-17 V2.1.1: 05-2009
  • EN55022:2010
  • EN55024:2010
  • EN61000-3-2/-3
  • FCC Part 15.107
  • BSMI CNS13438.99; CNS14336:99

NAP203, NAP303 and NAP353

  • FCC Part 15B
  • EN 301 489-1
  • EN 301 489-17
  • EN55022
  • EN55022
  • EN61000-3-2/-3
  • EN60601-1-2
  • BSMI CNS13438
Safety

NAP102

  • EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011
  • IEC 60950-1: 2005
  • BSMI

NAP203, NAP303 and NAP353

  • EN 60950-1
  • IEC 60950-1
  • BSMI CNS14336-1

Physical Specifications

Item

NAP102

  • Dimensions (WxDxH)(mm/in.): 130 x 130x 54.7/5.12 x 5.12 x 2.17
  • Weight (g/lb.): 300/0.67

NAP203

  • Dimensions (WxDxH)(mm/in.): 203.9 x 191.7 x 34.7/8.03 x 7.55 x 1.37
  • Weight (g/lb.): 445/0.98

NAP303

  • Dimensions (WxDxH)(mm/in.): 236 x 227 x 62/ 9.28 x 8.95 x 2.43
  • Weight (g/lb.): 982/2.17

NAP353

  • Dimensions (WxDxH)(mm/in.): 255 x 256 x 62/10.04 x 10.08 x 2.44
  • Weight (g/lb.): 1,708/3.77
Packing

NAP102

  • Dimensions (WxDxH)(mm/in.): 278 x 209 x 72/10.94 x 8.23 x 2.83
  • Weight (g/lb.): 700/1.54

NAP203

  • Dimensions (WxDxH)(mm/in.): 235 x 246 x 60/9.25 x 9.69 x 2.36
  • Weight (g/lb.): 938/2.07

NAP303

  • Dimensions (WxDxH)(mm/in.): 308 x 323 x 127/ 12.13 x 12.72 x 5.00
  • Weight (g/lb.): 1,743/3.85

NAP353

  • Dimensions (WxDxH)(mm/in.): 393 x 158 x 430/15.47 x 6.22 x 16.93
  • Weight (g/lb.): 3,904/8.63

Environmental Specifications

Weather Protection

NAP102, NAP203 and NAP303

  • -

NAP353

  • IP66 (Embedded heater for harsh weather)
Operating

NAP102, NAP203 and NAP303

  • Temperature : 0°C to 50°C/32°F to 122°F
  • Humidity : 10% to 90%

NAP353

  • Temperature : -40°C to 60°C/-40°F to 140°F
  • Humidity : 10% to 95% (non-condensing)
Storage

NAP102

  • Temperature : -30°C to 70°C/-22°F to 158°F
  • Humidity : 10% to 90% (non-condensing)

NAP203 and NAP303

  • Temperature : -40°C to 70°C/-40°F to 158°F
  • Humidity : 10% to 90% (non-condensing)

NAP353

  • Temperature : -40°C to 70°C/-40°F to 158°F
  • Humidity : 10% to 95% (non-condensing)