System Specifications
ADSL
- RADSL (ANSI T1.413, Issue 2)
- G.dmt ADSL over POTS (G.992.1 Annex A)
- G.dmt ADSL over ISDN(G.992.1 Annex B and U-R2)
- G.lite (G992.2)
- ADSL2 G.dmt.bis (G.992.3)
- ADSL2 G.lite.bis (G.992.4)
- ADSL2+ (G.992.5)
- Reach-Extended ADSL (RE ADSL) G.992.3 Annex L
ATM
- Support up to 8 PVCs
- ADSL physical connection ATM AAL5 (ATM Adaptation Layer type 5)
- Support multi-protocol over AAL5 (RFC 1483/2684)
- VC-based and LLC-based multiplexing
- Traffic Shaping UBR, CBR, VBR-nrt
- ATM Forum UNI 3.1/4.0 PVC
- ITU-T 1.610 F4/F5 OAM
Routing/Bridge Support
- IEEE 802.1d Transparent Bridging
- 802.1q Pass-through Bridge
- Up to 256 MAC Learning Address
- IP Routing: TCP, UDP, ICMP, ARP
- RIP v1 and RIP v2
- Static Route
- IP Multicasting, IGMP v1 and v2
IP Management
- SUA /Multi-NAT Internet sharing
- VPN (IPSec, PPTP) pass through
- VoIP SIP Pass-through
- Protocol and Generic Packet Filter
- DNS Proxy
- Dynamic DNS
- DHCP Server/Relay/Client
- UPnP support
Network Management
- Web-based Configuration Tool
- Command-line Interpreter
- SNMP v1 and v2 with MIBII
- Embedded FTP/TFTP for firmware upgrade and rom file backup/ restore
- Telnet Management
- Built-in Diagnostic Tool
Secure Access
- Password-protected System Management Terminal
- PAP (Password Authentication Protocol)
- CHAP (Challenge Handshake Authentication Protocol)
- IP Packet Filtering for Access Control
Advanced
- Zero Configuration
- Multimedia Auto Provisioner
Hardware Specification
- ADSL: One RJ-11or RJ-45 Port
- LAN: 1-Port, 10/100M Auto MDI/MDIX
- USB: 1 USB 1.1 Port
- Reset Button
- Status LEDs Indicator
- Power: 12V DC 1A
Physical Specifications
- Dimensions (WxDxH): 111 x 106.5 x 35 mm (4.37” x 4.2” x 1.38”)
- Weight: 170g (0.37lb)
Environmental Specification
Operation Environment
- Temperature: 0°C to 40°C (32°F to 104°F)
- Humidity: 20% to 85% (non condensing)
Storage Environment
- Temperature: -20°C to 60°C (-4°F to 140°F)
- Humidity: 20% to 90%
Certifications and Warranty
Certifications
Warranty