Your browser either does not support JavaScript or you have turned JavaScript off.

802.11n Wireless ADSL2+ 4-port Bonding Gateway

ADSL Compliance

  • G.992.1(G.dmt), Annex A compliant
  • G.992.2(G.lite), Annex A compliant
  • ANSI T1.413 compliant
  • G.992.3(ADSL2) compliant, Annex A, L and M
  • G.992.5(ADSL2+) compliant,Annex A, L and M
  • G.998.1(G.bond-ATM) ATM-based multi-pair bonding
  • I.432 ATM physical layer compliant
  • Reach-Extended ADSL (RE ADSL)
  • ADSL physical connection ATM AAL5 (ATM Adaptation Layer type 5)
  • Supports multi-protocol over AAL5 (RFC2684/1483)
  • PPP over ATM AAL5 (RFC2364)
  • Supports VC-based and LLC-based multiplexing
  • ATM traffic shaping (CBR, VBR-rt/nrt, UBR )
  • I.610 F4/F5 OAM
  • Broadcom PhyR, PHY level retransmission technology

Wireless

  • IEEE 802.11n draft 2.0 compliance, backward compatible with 11b/g
  • Data rates: 300 Mbps and auto fallback support
  • Frequency range: 2.4 GHz
  • MAC Address filter: 32
  • WEP data encryption 64/128bit
  • WPA/ WPA-PSK
  • WPA2/WPA2-PSK
  • Auto channel selection
  • Multiple SSID (4)
  • Wireless Distribution System (WDS)
  • WMM QoS support
  • Wireless Protected Setup (WPS)
  • IEEE 802.1x (EAP-MD5, TLS and TTLS)

Switch

  • IEEE 802.3 10BaseT Ethernet
  • IEEE 802.3u 100BaseTx Ethernet
  • Flow control in full duplex mode
  • Back pressure in half duplex mode

Bridge/Router Functions

  • IEEE 802.1D transparent bridge
  • PPPoE client (RFC 2516)
  • DHCP client/server/relay
  • DNS proxy
  • Dynamic DNS
  • RIP I/ RIP II supported
  • IGMP v1, v2, v3
  • IGMP snooping and proxy
  • MAC encapsulation routing / IPoE

QoS

  • Supports flexible packet classification
  • Supports 4 priority queue with strict priority scheme
    Supports tag processing
    Queuing and scheduling

Security

  • PAP/CHAP
  • MS-CHAP v1/v2

Firewall

  • DoS prevention
  • Stateful packet inspection
  • At least 20 ACL rules
  • Protocol and generic packet filter
  • SIP ALG

Management

  • HTTP Web GUI
  • Command Line Interpreter (CLI)
  • Secure Shell function (SSH)
  • ROM-D
  • Flexible remote management by protocol (Web/Telnet/FTP)
  • Configurable access control for remote management by interface (LAN/WAN/WLAN)
  • Firmware upgrade via Web/FTP/TFTP
  • Text based configuration
  • SNMP v1, v2 with MIB II
  • Broadband Forum TR-069 (w/ HTTPS), TR-098

Others

  • Power adapter complies with EISA/ CEC Tier II and Energy Star version 2.0
  • WAN: One RJ14 interface for ADSL bonding (over POTS)
  • LAN: Four auto MDI/MDI-X 10/100Base-Tx Ethernet RJ45 ports
  • Wireless: One external 2 dBi non-detachable antenna and One 3dBi internal antenna
  • WLAN/WPS button: One button for WLAN on-off and WPS configuration
  • Power Switch: Push type Reset button: One button for restore factory default settings
  • 12V DC 1500mA
  • Power supply:120V/230V/240V
  • Item weight: net 0.59 kg, gross 1.16 kg
  • Item dimension: 241(W) x 165(D) x 63(H) mm (9.49(W) x 6.49 (D) x 2.48(H) inches)
  • Packing dimension: 360(W) x 200(D) x 110(H) mm (14.17(W) x 7.87(D) x 4.33(H) inches)

Operating Environment

Operating environment

  • Temperature: 0°C ~ 40°C
  • Humidity: 20% ~ 85% RH (non-condensing)

Storage environment

  • Temperature: -20°C ~ 60°C
  • Humidity: 20% ~ 90% RH (non-condensing)

EMC

  • EN55022 Class B
  • EN61000-3-2: 2000
  • EN61000-3-3: 1995+A1: 2001
  • FCC Part 15 (Class B) & FCC Part 68

Safety

  • CSA 60950-1
  • UL 60950-1
  • EN 60950-1: 2001+A11
  • IEC 60950-1: 2001
Where to Buy