Your browser either does not support JavaScript or you have turned JavaScript off.

802.11ac Dual-Radio PoE Access Point

Model NWA1123-Acv2 NWA1123-AC PRO
Product name 802.11ac Dual-Radio Ceiling Mount PoE Access Point 802.11ac Dual-Radio Dual Mount PoE Access Point
Model NWA1123-Acv2 NWA1123-AC PRO
Support data rate 802.11n: up to 300 Mbps in MCS15 (40MHz; GI=400ns)
802.11ac:up to 866 Mbps in MCS9 (80MHz; 2 spatial Streams; GI=400ns)
802.11n: up to 450 Mbps in MCS15 (40 MHz)
802.11ac: up to 1300 Mbps in MCS9 (80 MHz)
802.11 premium features
  • 2x2 multiple-input multiple-output (MIMO) with two spatial streams
  • Maximal ratio combining (MRC)
  • 20-, 40- and 80-MHz channels
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • Cyclic Delay diversity (CSD) support
  • Maximum Likelihood Demodulation (MLD) support
  • Low Density Parity Check (LDPC) support
  • 3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams
  • Maximal Ratio Combining (MRC)
  • 20-, 40- and 80-MHz channels
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • Cyclic Delay diversity (CSD) support
  • Maximum Likelihood Demodulation (MLD) support
  • Low Density Parity Check (LDPC) support
Antenna gain 2T2R MIMO
2.4 GHz 3 dBi
3T3R MIMO
Ceiling: 3 dBi
Wall: 4 dBi
2T2R MIMO
5 GHz 4 dBi
3T3R MIMO
Ceiling: 4 dBi
Wall: 5 dBi
Receive sensitivity Min. Rx sensitivity to -99 dBm Min. Rx sensitivity to -102 dBm

Model NWA1123-Acv2 NWA1123-AC PRO
Number of 10/100/1000M LAN 1 2
PoE power draw 9 W 12.48 W (802.3at PoE)*
Model NWA1123-Acv2 NWA1123-AC PRO
Security and privacy
  • WEP, WPA/WPA2-PSK, WPA/WPA2-Enterprise
  • EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST, EAP-AKA and EAP-SIM
  • WMM
  • 802.1X
  • MAC filtering
  • L2 Isolation
  • RADIUS authentication
  • WEP, WPA/WPA2-PSK, WPA/WPA2-Enterprise
  • EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST, EAP-AKA and EAP-SIM
  • WMM
  • 802.1X
  • MAC filtering
  • L2 Isolation
  • RADIUS authentication
Number of multiple SSID 16 16
Network IPv6 support
VLANs
DHCP client
IPv6 support
VLANs
DHCP client
Model NWA1123-Acv2 NWA1123-AC PRO
ZON Utility
  • Discovery of Zyxel switches, APs and gateways
  • Centralized and batch configurations
    • IP configuration
    • IP renew
    • Device reboot
    • Device locating
    • Web GUI access
    • Firmware upgrade
    • Password configuration
    • One-click quick association with Zyxel AP Configurator (ZAC)
  • Discovery of Zyxel switches, APs and gateways
  • Centralized and batch configurations
    • IP configuration
    • IP renew
    • Device reboot
    • Device locating
    • Web GUI access
    • Firmware upgrade
    • Password configuration
    • One-click quick association with Zyxel AP Configurator (ZAC)
ZAC* Batch AP configuration
Batch AP firmware upgrade
Batch AP profile backup
Batch AP configuration
Batch AP firmware upgrade
Batch AP profile backup
Standalone AP mode Yes Yes
CLI Yes, SSH Yes, SSH
SNMP Yes Yes
Model NWA1123-Acv2 NWA1123-AC PRO
Plenum rating Yes Yes
Power supply Input: AC 100-240 V - 50/60 Hz 0.3 A
Output: DC +12 V 1 A
802.3at PoE only (No DC jack)
MTBF (hr) 1,727,244 1,005,235
Model NWA1123-Acv2 NWA1123-AC PRO
Ethernet IEEE 802.3,
IEEE 802.3u,
IEEE802.11ac,
IEEE 802.3az,
IEEE 802.3af
IEEE 802.3,
IEEE 802.3u,
IEEE 802.11ab,
IEEE 802.3au,
IEEE 802.3az,
IEEE 802.3at
WLAN Input: AC 100-240 V - 50
802.11b: DBPSK, DQPSK, CCK
802.11g: BPSK, QPSK, 16-QAM, 64-QAM
802.11a: BPSK, QPSK, 16-QAM, 64-QAM
802.11n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 64-QAM, 256-QAM
Input: AC 100-240 V - 50
802.11b: DBPSK, DQPSK, CCK
802.11g: BPSK, QPSK, 16-QAM, 64-QAM
802.11a: BPSK, QPSK, 16-QAM, 64-QAM
802.11n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 64-QAM, 256-QAM
Model NWA1123-Acv2 NWA1123-AC PRO
Radio FCC Part 15C,
FCC Part 15E,
ETSI EN 300 328,
EN 301 893,
LP0002,
EN 60601-1-2
FCC part 15C,
FCC part 15E,
ETSI EN 300 328,
EN 301 893,
LP0002
EMC FCC Part 15B,
EN 301 489-1
EN 301 489-17,
EN55022,
EN55024,
EN61000-3-2/-3,
BSMI CNS13438
FCC part 15B,
EN 301 489-1,
EN 301 489-17,
EN55022,
EN55024,
EN61000-3-2/-3,
BSMI CNS13438
Safety EN 60950-1,
IEC 60950-1 ,
BSMI CNS14336-1
EN 60950-1,
IEC 60950-1 ,
BSMI CNS14336-1
Model NWA1123-Acv2 NWA1123-AC PRO
Item Dimensionss (WxDxH)(mm/in.):
130 x 130 x 54.5/5.12 x 5.12 x 2.17
Wight (g/lb.): 300/0.67
Dimensionss (WxDxH)(mm/in.):
203.9 x 191.7 x 34.7/8.03 x 7.55 x 1.37
Wight (g/lb.): 445/0.98
Packing Dimensions (WxDxH)(mm/in.):
278 x 209 x 72/10.94 x 8.23 x 2.83
Wight (g/lb.): 700/1.54
Dimensionss (WxDxH)(mm/in.):
240 x 235 x 100/9.45 x 9.25 x 3.94
Wight (g/lb.): 1210/2.67
Included accessories Power adapter
Wall/ceiling mount plate
PoE Injector (Eco pack excluded)
Ethernet 45 cable (Eco pack excluded)
Wall/ceiling mount plate
Model NWA1123-Acv2 NWA1123-AC PRO
Operating Temperature
Operating Humidity
0°C to 50°C/32°F to 122°F
10% to 90% (Non-condensing)
0°C to 50°C/32°F to 122°F
10% to 90% (non-condensing)
Storage Temperature
Storage Humidity
-30°C to 70°C/-22°F to 158°F
10% to 90%
-40°C to 70°C/-40°F to 158°F
10% to 90% (non-condensing)
*1 Maximum output power is limited by regional regulatory.
*2 Support from firmware V1.1.2 or above
Where to Buy