Your browser either does not support JavaScript or you have turned JavaScript off.

16-port Environmentally-Hardened VDSL2 Remote IP DSLAM

  • Network Interface: 2 x Gigabit Ethernet combo ports (100/1000 Based-T and SFP)
  • Subscriber Interface: 16 quick connectors for 16-port VDSL2 subscribers (with surge protection) and 16 quick connectors for POTS interfaces (600 Ohm)
  • One serial console port for local management (DB-9)
  • One out-band management Ethernet port
  • One alarm port (RJ-45 connector)
  • The LEDs show VDSL2 connection status
  • One DB9 for 4 in and 1 out alarm contract
  • Fiber-Optic tray
  • Attaching the mounting bracket
  • AC universal input connector
  • ADSL2+ & VDSL2 profile management
  • Alarm profile management
  • CLI/Web GUI/Telnet/MIB
  • STP/RSTP
  • IEEE 802.1Q
  • TLS (Q-in-Q)
  • Double tagging
  • DHCP option 82 (circuit ID & remote ID)
  • DHCP relay
  • 802.3ad and static link aggregation
  • IPv4 multicasting
  • IGMP v1, v2 and v3 snooping/proxy
  • Multicast VLAN (up to 16)
  • Support 512 multicast groups
  • Support intermediate leave
  • Support 24 members in a multicast group
  • Static multicast forwarding
  • IGMP group count limiting per VDSL port
  • IGMP 128 filtering profile with each profile having 16 multicast address ranges
  • Support the function to limit the number of IGMP messages on each subscriber interface or each subscriber interface unit per second
  • Port isolation
  • Rule-based ACL filtering based on MAC address, IP address, protocol ID, UDP/TCP port number, Ethernet type
  • ARP/DHCP broadcast & NetBIOS packet filtering
  • IGMP filtering
  • Profile 8a, 8b, 8c, 8d, 12a, 12b and 17a
  • INP capability: Support the capability of impulse noise protection (INP) as defined in ITU-T Rec. G.993.2. The minimum impulse noise protection (INP MIN) can be configurable (from 0 to 16)
  • Fixed rate and rate adaptive
  • Power back off (UPBO & DPBO)
  • Standard RFI configuration
  • ADSL/POTS band off
  • Interleave delay setting
  • Limit PSD mask: to reduce the impact of interference and attenuation, available options are listed as following: nus0_d32, eu32_d32, eu36_d48, eu40_d48, eu44_d48, eu48_d48, eu52_d64,eu56_d64, eu60_d64, eu64_d64, eu128_d128, 997_like
  • Loop diagnostics (SELT & DELT)
  • ADSL2+ fall back
  • Power Consumption: 50W maximum
  • Item Weight: 9000 g (19.89lb)
  • Item Dimension: 380.5 (W) x 104 (D) x 390 (H) mm
  • Packing Weight: 10400 g (22.98lb)
  • Packing Dimension: 530 (W) x 280 (D) x 555 (H) mm
  • Temperature:
    • Operating: 0℃ ~ 60℃
    • Storage: -40℃ ~ 70℃
  • Humidity:
    • Operating 10 ~ 95% (Non-condensing)
    • Storage 5 ~ 95% (Non-condensing)
  • RoHS
  • K.20
  • ETSI300-019
  • Safety
    • EN60950-1
    • CSA60950-1
    • UL60950-1
    • IEC60950-1
  • EMC
    • FCC Part 15 Class A
    • EN55022 Class A
    • ETSI300-386
Where to Buy