System Specifications

ADSL support

• ADSL2/2+, Annex L and Annex M
• Support DELT (dual ended loop test)
• Rate adaptation (SRA)
• "Dying Gasp" functionality support to notify the DSLAM that power has been turned off

ATM Support

• 8 PVCs Support
• RFC 1483/2684 Multiple Protocol over AAL5
• RFC 2364 PPP over AAL5
• RFC 2516 PPP over Ethernet
• VC and LLC Multiplexing
• Traffic Shaping UBR, CBR, VBR-nrt
• ATM Forum UNI 3.1/ 4.0 PVC
• 610 OAM remote F4/F5 loop-back, AIS, and RDI OAM cells
• ATM-based Multi-Pair Bonding (G.998.1)

Ethernet Functions

• Default Bridging for user traffic
• ARP
• MAC count limiting
• 802.1Q Tag-Based VLAN
• 802.1P CoS with priority queuing

IP Management

• IP routing : TCP, UDP, ICMP, ARP
• VPN (IPSec, PPTP, L2TP) pass-through
• DHCPserver (LAN port)
• DHC Relay/Client (WAN port)
• RADIUS client
• DNS repaly/proxy
• Dynamic DNS
• RIP/RIP v2 routing functions
• NAT/PAT/NAPT
• IGMP Proxy/snooping and fast leave (v1, v2)
• IP QoS
• UPnP IGD 1.0

Security

• Service access control based on incoming interface WAN or LAN
• Service access control based on source IP address
• Anti-Denial of Service, including SYNC flooding, IP Smurfing, Ping of Death, Fraggle, Teardrop, Land
• No response for WAN port scanning
• TCP/IP/port/Interface filtering rules
• Protect against IP and MAC address spoofing
• Stateful Packet Inspection

Configuration and Management

• Web-based GUI
• Command Line Interface (CLI)
• Telnet Remote Management
• TFTP FW upgrade and configuration backup/restore
• SNMPv1/v2c

Hardware Specification

• 1 RJ-11 connector for 2 ADSL2+ ports.
• 4-Port RJ-45 connectors for 10/100Mbps with Auto MDI/MDIX.
• Power switch.
• reset button to return to the default setting
• DC Power Jack. (12V, 1.5A).
• LED
  • System LED
  • Alarm LED
  • 4 Ethernet LAN LEDs
  • 2 ADSL2+ LED

Physical Specifications

• Dimensions : 207(W) x 161(D )x 52(H) mm
• Weight: 400 g

Operating Environment

• Temperature: 0°C ~ 40°C
• Humidity: 20% ~ 85% ( non-condensing)
• Power input and Power Consumption
• 12 VDC (1.5A)
• 12 watt (on board power consumption)

Certificate

• RoHS & WEEE
• Safety
  • UL1950
  • CSA C22.2 No. 950
• EMC
  • FCC Part 15 & Part 68ClassB