Models

WAC6103D-I

802.11ac Dual Radio Dual-optimized Antenna 3x3 Access Point

RF Specifications

Support data rate
  • 802.11a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
  • 802.11n: up to 450 Mbps in MCS15 (40 MHz)
  • 802.11ac: up to 1300 Mbps in MCS9 (80 MHz)
802.11n/ac premium features
  • 3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams
  • Maximal Ratio Combining (MRC)
  • 20-, 40- and 80-MHz channels
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • Cyclic Delay diversity (CSD) support
  • Maximum Likehood Demodulation (MLD) support
  • Low Density Parity Check (LDPC) support
Antenna

Dual-optimized internal antenna

  • Ceiling: 2.4 GHz 3 dBi; 5 GHz 4 dBi
  • Wall: 2.4 GHz 4 dBi; 5 GHz 5 dBi
Receive sensitivity

Min. Rx sensitivity up to -102 dBm

WLAN

WLAN maximum throughput
  • Up to 900 Mbps
Security and privacy
  • Supported WEP, WPA/WPA2-Enterprise, WMM (Wi-Fi certified) ,multiple EAP types, IEEE802.1X, MAC filtering, Layer-2 isolation , RADIUS authentication and more encryption supported when working with ZyXEL NXC controller series
Network
  • Support IPv6
  • VLANs
  • DHCP Client
QoS
  • WMM
  • WMM power save
  • DiffServ marking

Management

ZON utility

Discovery of ZyXEL switches, APs and gateways in local area network Centralized and batch configurations

  • IP configuration
  • IP renew
  • Device factory reset
  • Device reboot
  • Device locating
  • Web GUI access
  • Firmware upgrad
  • Password configuration
  • One-click quick association with ZyXEL AP Configurator (ZAC)
Smart connect
  • Discover neighboring devices
  • One-click remote management access to the neighboring ZyXEL devices
ZyXEL AP configurator *1
  • Batch AP configuration
  • Batch AP firmware upgrade
  • Batch AP profile backup

*1: Features supported on Standalone AP mode

ZyXEL Wireless Optimizer
  • Wi-Fi AP planning
  • Wi-Fi coverage detection
  • Wireless health management

Physical Interfaces

Interfaces
  • 2 gigabit port
  • 1 4-Pin serial console port
  • Support 802.3at PoE for full functional operation
Input power
  • 802.3at PoE only

Standard Compliance

Ethernet
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.11ab
  • IEEE 802.3au
  • IEEE 802.3az
  • IEEE 802.3at
PoE

IEEE 802.3at

PoE power draw

12.48 W (802.3at PoE)

WLAN
  • 802.11b: DBPSK, DQPSK, CCK
  • 802.11g: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11a: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM

Certifications

Radio
  • FCC part 15C
  • FCC part 15E
  • ETSI EN 300 328
  • EN 301 893
  • LP0002
EMC
  • FCC part 15B
  • EN 301 489-1
  • EN 301 489-17
  • EN55022,EN55024
  • EN61000-3-2/-3
  • EN60601-1-2
  • BSMI CNS13438
Safety
  • EN 60950-1
  • IEC 60950-1
  • BSMI CNS14336-1

Physical Specifications

Dimensions
  • 203.9 x 191.7 x 34.7 mm / 8.03 x 7.55 x 1.37in. (WxDxH)
Weight
  • 445g / 0.98lb.

Environmental Specifications

Operating Temperature and Humidity
  • Temperature: 0°C to 50°C / 32°F to 122°F
  • Humidity: 10% to 90% (non-condensing)
Storage Temperature and Humidity
  • Temperature: -40°C to 70°C / -40°F to 158°F
  • Humidity: 10% to 90% (non-condensing)

For more detailed information, please download the datasheet here.